Bridge Crane

Features of Overhead Bridge Crane

• Model number: LD, LDA, LH type, HD, LHY, QD, QB, QY, QDY, HY, EX-CHD, QZ, QC, LX, LDP, LDE type, Kuangshan, Weihua, Henan mine overhead bridge crane
• Other name: Overhead crane bridge
• Rated load capacity / SWL / WLL: 1 2 3 5 7 ton 7.5ton 8ton 10ton 15ton 16ton 20ton 25ton 30ton 32ton 35ton 40ton 50ton 60ton 70ton 75ton 80ton 100ton 150ton 200ton 250ton 260ton 300ton 320ton 330ton 350ton 400 500 Ton/TN/Tonne/Metric Ton. Overhead bridge crane design calculation can be provided at request.
• Span(Width): 5m 6m 8m 10m 12m 14m 15m 16m 18m 20m 22m 24m 25m 26m 28m 30m 32m 35m 36m 38m 40m 42m span overhead bridge crane
• Lift height: 5~13meters
• Heavy load weight: 1t 2t 3t 5t 7.5t 10t 15t 16t 20t 25t 30t 32t 35t 40t 50t 60t 70t 80t 90t 100t 120t 125t 130t 150t 160t 200t 250t 300t 350t 400t 500t 600t overhead bridge crane
• Lifting mechanism of overhead bridge crane: They can be supplied with battery powered or pneumatic, manual chain hoists, chain block, electric chain hoists, or electric wire rope hoists, low headroom hoist, electric winch or electric lifting frame.
• Light duty & modular design, high quality carbon steel Q235B or Q345B(16Mn).
• Lifting speed: 1~20m/min dual speed or variable speed (custom) for hoisting speed
• Crane Travelling Speed: 20~100m/min single speed or double speed
• Main hook capacity: 5 10 15 16 20 25 30 35 40 50 60 80 100 150 200 TON
• Auxiliary hook capacity: 1 2 3 5 6 7.5 10 20 TON
• Power supply: AC-3Phase-220/380/400/415/440V-50/60Hz
• Work duty: A3-A5 / Light duty / Heavy duty bridge crane
• Moveable overhead crane or travelling overhead crane can built as your specific needs.
• Lifting capacity: 125kg 150kg 250kg 300kg 500kg 1000kg 2000kg 2500kg 3000kg 3500kg 4000kg 5000kg 1000 pounds 2000lbs 3000lbs 4000pounds 8000pounds
• Container spreader, chains, C hook spreaders, magnets, lifting beams, multi-lifting point attachments, clamps and other special lifting devices can be equipped on the overhead bridge crane to handle the slabs, long concrete beams and bridge girders, heavy rolls, steel coil, granite and marble blocks, wind turbines, stones, plates, metal structure, steel sheet, rod bars, concrete pipes, compressed pressure tanks(LNG LPG CNG), ISO tanks etc.
• Control method: Ground control, wire button control, pendant control, cab control, joystick control, wireless radio remote control overhead bridge crane
• Width of Span of the crane: 30ft 40ft 50ft 60ft 70ft 80ft 90ft
• Overhead crane systems are designed in accordance with ISO, BS, FEM and DIN standards.
• 2 ton bridge cranes come standard with a trolley and an inside the track festooning system for cables and hoses. Concrete anchor bolts and sway bracing are not included.
• Popular overhead crane configuration: 250 LB, 500 LB, 1,000 LB, 2,000 LB, & 4,000 LBS capacities | 8', 10', 12', 14', 15', 20', 23', 28' & 34' bridge length | 11', 23', 43', 63 & 83' runway length | 20', 25' & 30' support center spacing. If you do not see the bridge crane size you need please contact us.
• Comply with all relevant safety standards and regulations. Certifications CE, FDA, SABER, ISO, UL, FCC, EAC, ROHS, REACH. SGS inspection is available.
• Track type: P18 P24 P30 P38 P43 P50 QU70 QU80 QU100 QU120 rail size
• Overhead bridge crane power supply: Busbar conductor. Inside the track festoon system included
• Applicable industries: Workshop overhead bridge crane for warehouse, building material shop, machinery repair shop, nuclear power station, automotive industry, manufacturing plant, food & beverage factory, civil engineering construction works, energy & mining, oil & gas, renewable energy, die casting, waste water treatment, plastic industry, indoor and outdoor.
• Variable Frequency Drives (VFD): Stepless speed control, enables smooth acceleration and deceleration, reducing wear and tear on components while optimizing energy consumption. SCHNEIDER, SIEMENS, CHINT, YASKAWA or other brands.
• Drive motor: Heavy duty motor, 60%ED rating. IP55/ H Insulation. ABB, SIEMENS, SEW motor or other brands both available for the motor driven overhead bridge crane.
• Overhead bridge crane price: $2,000~$60,000 depending on the size and lifting weight of the crane
• Overhead bridge crane manufacturer: Overhead bridge crane China supplier
• Electric hoist bridge crane harga: Contact us now for a quote
• Application of overhead crane: The bridge cranes are designed to handle and lift various of loads, for example, the workshop overhead bridge crane for marble, granite, container, steel pipe, rebar, tube, mold, prefab container house, pallet, large coils, pump, fabricated steel parts, jumbo manufacturing parts, glass, wood & timber, cast iron, trommel, printing machine, pipelines, substation transformer, beam fabricating and general manufacturing, etc. Applications involving vacuums, magnets, other high-impact lifters, or a high-cycle rate are considered severe usage (continuous service) and may require special design considerations. Please contact YUANDA for your project.
• Bay: 1 2 3 4 bays overhead bridge crane
• Tested for complete function, both indoor and outdoor, prior to shipment
• Backed by stringent quality assurance guidelines, including CMAA, ANSI, AISC, OSHA, HMI and ASME standards
• Food grade or cleanroom overhead bridge crane is available as per special requirement.

To learn more about our material handling solutions and services, or to discuss how we can help with your next crane project, reach out to the team today.

Different Types of Bridge Crane

Overhead bridge cranes perform the same material handling and load lifting operations as other types of giant cranes, but overhead crane systems offer the added benefits of operating at higher speeds and lifting extremely large load capacities, without adding additional floor obstructions to a facility. There are many different types of overhead bridge crane systems. They are either process cranes used for constant, specific heavy-duty lifting needs or modular cranes used in smaller mills and manufacturing facilities. Additionally, overhead travelling bridge cranes typically come in two configurations: single girder and double girder. At YUANDA, we are equipped to supply you with the overhead crane system to meet your every need.

Single Girder Overhead Crane

The single girder type overhead crane is the most common overhead crane, which is usually less expensive and simpler. It is also known as single beam bridge crane, generally used for light applications, normally up to 10 tonnes, such as 2 ton bridge crane, 3 ton bridge crane and 5 ton bridge crane.

Double Girder Overhead Crane

The double girder overhead crane structure is used for heavy-duty lifting and moving applications up to 125 tons and reaching over 100 feet of span. It is also known as goliath overhead crane.  This type crane machine can gain maximum lifting height because the hoist of the double girder overhead bridge crane is placed on the beams and the hook fits between them. Overhead bridge crane with auxiliary hook is the other common type of the crane, also referred to as double hook overhead bridge crane. The auxiliary hook hoist can be used for collaborative main hook tilting or tipping the material. Our most popular capacities are: 16/3 ton 20/5t 75/20t overhead crane and 80/20t 100/20ton overhead bridge crane. These cranes may be used for metal smelting, waste recycling, billet handling, refuse handling, fabricating plants, cement mills and more industries. 

Top Running Bridge Crane

This mobile overhead bridge crane type can be configured in a top running single girder bridge crane and top running double girder bridge crane design. They include a rail installed on top of each runway, and the bridge wheels move on the rail instead of the bottom flange of the runway beam. These cranes are supported by the building structure or runway support columns, or sister columns, and are ideal for moving extremely heavy loads, such as 20 ton bridge crane, 25ton bridge crane and 30 ton bridge crane.

Suspended Overhead Crane

Suspended overhead crane is also named as Under Running Bridge Crane, which is a type of light duty overhead crane that is suspended from the workshop ceiling. The rails of a suspended overhead bridge crane are secured to the ceiling of the building. The elimination of dedicated support columns provides additional floor space, but limits lifting capacity. This overhead crane system can be designed as Under running single girder bridge crane or Under running double girder bridge crane. Underhung overhead bridge cranes can be manufactured with cantilevers to access difficult points, and even can be designed to transfer materials between halls. The load capacity of this underslung overhead bridge cranes is usually relatively small, such as 1 ton overhead bridge crane, 500kg overhead bridge crane or 250kg bridge crane. They are good choices for powerhouses, public utilities, turbine rooms, motor rooms, and transformer stations.

Freestanding Bridge Crane System

Freestanding Crane System is a perfect solution for facilities that don’t have the structural support in place for fixed overhead bridge cranes. Because the runways are usually installed above the floor without footers or foundations. Freestanding overhead bridge crane system eliminate the need to attach to the workshop’s structure, for they stand in self-supporting way with their own steelwork, including pillar, column, beam, rail and so on. Freestanding modular bridge cranes can be installed in any area of a facility that has 6-inch reinforced concrete and provides outstanding lifting precision. The Free Standing Bridge Crane Systems low headroom design maximizes lift when headroom is at a premium. Freestanding Bridge Crane Cells are available in runway lengths of 20, 25 and 30 feet. Multiple work cells can be combined for long runways; existing systems can be retrofitted with additional cells.

Freestanding Workstation Bridge Crane

Work Station cranes are a type of industrial crane that consist of a moving bridge that runs across parallel runways. On the bridge, there is commonly attached a hoist or other lifting devices such as a manipulator or intelligent lifting device that travels across the bridge. Freestanding Workstation Bridge Cranes are lightweight and can be installed in any workspace. Both the aluminum and steel Workstation Crane Systems utilize enclosed track that is high in strength and low in weight, giving you ease of operation to push and pull, and full range of movement. These are often freestanding cranes but depending on the building structure can be Ceiling Mounted Workstation Bridge Cranes which save floor space. Freestanding enclosed track workstation cranes enable effortless overhead handling where ergonomic, controlled, & fast material transfer is needed.

Low Headroom Overhead Bridge Crane

Low headroom overhead crane is an overhead crane designed for low headroom applications, usually in workshops or other plants with limited height. This type of overhead crane has the electric hoist placed at the side of the main girder which increase the lifting height of the hoist relatively and could lower the investment on building height. 

EOT Crane

Electric Overhead Traveling Cranes, shortened as EOT cranes, are a common type of overhead crane. They are found in many factories and warehouses. These cranes are electrically operated by a control pendant, radio/IR remote pendant, or from an operator cabin attached to the crane. The most commonly used models are 40 ton overhead bridge crane, 50 ton overhead bridge crane and 60 ton overhead bridge crane.

Process Crane

A process overhead bridge crane is built for a specific need and these types of cranes are heavy-duty (mainly Class D & E cranes) and in constant operation. They’re typically a top-running, double girder design and have a lot of engineering built-in to perform high capacity lifts at high frequency. Process cranes can be found in places like automotive assembly plants, steel mills, container yards, plastic plants, lumber mills and can perform anywhere from 10-20 lifts per hour at around 50-75% of their rated capacity.

Modular Bridge Crane

Modular overhead bridge cranes often referred to as free standing monorail bridge cranes or kit cranes. These small bridge cranes are typically found in smaller manufacturing facilities, garage, smaller-sized mills, or machine shops, and have a design consisting of a more base-level hoist, trolley, and bridge. Either steel track or aluminum rail, the light kbk overhead bridge crane systems are economical and affordable solutions to moving material through a facility and don’t normally come with a lot of extra bells and whistles. 

Monorail Bridge Crane

A monorail crane is a bridge crane with a monorail system that operates above the ground. This allows the load to be moved in a straight line. The trolley and hoist are mounted on an I-beam and operate along the bottom rail. A monorail overhead bridge crane can help lift and transport large, heavy items with ease. They also provide enough space for operators to move about easily. Monorails are commonly used in a variety of commercial settings including industrial plants, warehouses, automobile showrooms, assembly lines, convention centers, retail stores, and more.  

Box Girder Bridge Crane

Box girder bridge cranes are a crucial type of overhead crane commonly used in industries requiring heavy-duty lifting solutions. These cranes are characterized by their box-shaped girders, which provide immense strength and stability, making them ideal for handling large loads. The hot sale series are 100 ton bridge crane, 300 ton bridge crane and 500 ton bridge crane.

There are various different types of overhead cranes along with different configurations that are available. They can be designed as roof ceiling mounted bridge crane, hanging bridge crane and free standing overhead bridge crane as per different support structure. With different beam design, there are monorail hoist crane, monorail bridge crane and double beam overhead bridge crane. Made as different sizes, they can be mini overhead bridge crane and goliath bridge crane. Sorted by power source, there are electric bridge crane, manual bridge crane, motor-driven overhead crane or moveable bridge crane. Based on the lifting devices integrated, they can be divided into overhead bridge crane with electric hoist and bulk material lifting overhead bridge crane with grab, bucket, grapple or magnet lifter. And some superior models includes Europe type overhead bridge crane and low headroom bridge crane.

For some special applications that require contaminant-free environments, clean room overhead bridge crane and stainless steel overhead bridge crane are a premier choice which offer reliable lifting and lowering power without introducing dust, microbes, chemicals, and other potential contaminants during operation. They are employed in a wide range of industries, including aerospace, food and beverage, electronics, medical, pharmaceutical and more. 

All these different types of overhead cranes are widely use in a vast number of industries, to complete work safely and efficiently. The heavy lifting overhead bridge crane can be used for aviation industry, industrial buildings, concrete manufacturing, metal manufacturing, power plants, wind power industry, steel plants, shipbuilding and more. An electric hoist bridge crane can be a great investment for your business. Before you buy a bridge crane, it is important to consider the unique needs of your facility when selecting the best type of crane for the job. Our company has a wide selection of overhead bridge crane for sale, we also sell used bridge cranes and secondhand supporting steelwork. If you budget is limited, a select inventory of used, surplus crane and second hand overhead bridge crane products available for purchase. 

Not sure which type of bridge crane is best for your lifting needs? Contact YUANDA today! Our experienced crane specialists can help choose the right overhead crane for your heavy lifting application.

Overhead Bridge Crane Components, Accessories and Bridge Crane Parts

The overhead bridge crane is composed of travelling system, lifting system, electrification systems and control system. Regarding the steel structure, it consists of two overhead runways built into the building’s support structure, connected by a single or double beam configuration, called a “bridge.” The bridge is supported on either end by an end truck, which rides on wheels along runways or parallel beams—allowing it to move up and down the bay. Each part of the puente grua bridge crane works together to move loads. The hoist lifts and lowers materials, while the trolley moves across the bridge, left or right. The steel plate material of bridge crane structure is general-purpose steel Q235B, and the steel plate will be pretreated by shot blasting to reach the standardization of Sa2.5 level. The bridge cranes operate on three axis’ of hook movement, which provides for the flexibility required to position and place loads very gently.

Common Overhead Bridge Crane Components:

The crane bridge – the load bearing beam which the hoist and trolley ride on. The bridge girder travels along the runway beams. The bridge travels on an overhead runway system consisting of two parallel runways. The crane bridge has wheels or trolleys that move along the top flange of each runway beam. The rigid overhead bridge crane structure provides excellent control and precise positioning when moving materials.

End Truck – also known as bridge crane end carriage or end beam, it drives the bridge down the runway.

The Trolley – The overhead bridge crane trolley is what transports heavy material along a rail at overhead heights. It is mounted on the bridge and can move along both directions of travel. A trolley has wheels or rollers that allow it to move on a bridge girder from side to side. Double girder bridge crane trolley travel assembly moves in two girders.

The Hoist Unit – Electric bridge crane hoist is mounted to the bottom of the bridge, moves vertically in the trolley, lifting and lowering loads by means of a chain or rope mechanism connected to its hook.  

Hook - attaches the load to be moved.

The Runway – Overhead bridge crane rails are a pair of I-beams or H-beams that the bridge and trolley travel on.

Control Panel - used to control the end truck.

Structural Supports – The support structure of overhead bridge crane include columns, beams, supports, braces and brackets. The vertical supports hold up the crane rails and bridge, which must be robust and securely anchored to the building’s foundation. Additional structural elements provide stability and prevent the crane from swaying or tipping.

Control System - A powered overhead crane needs both electrification and controls. The overhead bridge crane can be controlled via radio frequency remote control, pendant controls, or while in a cabin attached to the crane. Radio remote controls make it easy to operate cranes, hoists, and trolleys wirelessly. The crane use serial-resistance or frequency control for stable travelling and accurate positioning.

Electrical System – High protection class IP54. Using Frequency converter device or serial-resistance speed-regulation. Module control speed, micro-speed and double speed are available. Safety smooth slide wire, or bus bar, high conductivity.

Safety Device – Optional safety features include radio remote control, independent traveling pushbutton stations, sensors, anti-collision systems, overload protection, travel limit switches for bridge and trolley, variable frequency control, bridge lights and warning bells or horn, and weight readout.

Overhead Crane Attachments – Overhead bridge crane attachments are used for attaching a load to a hoist. We design and engineer full below-the-hook lifting solutions, including interrelated parts like automatic, hydraulic, pneumatic and motorized lifting equipment, load scales, J-hooks, spreader bars, C-hooks, slab and plate lifters, vacuum lifters, lifting beams, motorized coil tongs, automatic slab tongs, roll lifter, hydraulic rotating ingot tongs, metal sheet lifters, gripper units, scrap grabs and magnets.

Overhead Crane Kit – The Overhead Bridge Crane Kit is a complete crane system from our company. It features our top-rated low headroom wire rope hoist or open winch, and is designed to work as a complete system, with all components optimized together for your specific needs. We offer a range of crane kits that cover capacities from 1/2 ton to 80 tons. Our crane kits range from simple bolt together prepainted workstation crane kits to 80 ton overhead crane system kits that require more advanced skills for assembly. YUANDA Crane is proud to offer high-quality tools, parts, crane inspections and service for overhead cranes of all kinds. Our comprehensive inventory of replacement parts and components includes our own cranes, hoists, and trolleys, as well as those of other well-known brands, such as Demag, Abus, Kito, SWF, KONE, YALE, REID, PLANET, Gorbel, etc. We can also offer a complete set of overhead bridge crane with building structure on a turnkey basis.

Others of overhead bridge crane components include bridge crane wheel assembly, wire rope hoist, electric chain hoist, trolley, controls, crane cabs, electrification, bridge crane motor, brakes, steel beam, end trucks, bus bar, C-track festoon, cable, clamps, load cells, bridge panel, pendant control and below-the-hook devices. Grabs, buckets, chain slings, spreader beams, crane scales, magnetic lifters and steel coil lifters are some of our popular below-the-hook products. With a powerful combination of hoists, winches, motors, pulleys and all other bridge crane spare parts, bridge cranes provide efficient and effective solutions for transfer operations in factories, warehouses, construction sites, and ports around the world.

Applications of Overhead Bridge Crane

Overhead bridge cranes are heavy-duty material handling equipment with high loading capacities. An operator steers a bridge crane manually or uses a wired pendant station or wireless controls. Bridge cranes are typically used for multi-directional material transport to help manufacturing, storing, loading, and unloading operations in an industrial facility. 

Bridge cranes offer a wider range of motion and more flexibility than other giant cranes. This makes them ideal for moving large or heavy loads in multiple directions, which can be especially helpful in manufacturing facilities where products are often transported between different workstations. YUANDA overhead bridge cranes are high-performance systems that easily handle today's most demanding applications. For example, overhead bridge crane for fabricating, machining, die handling, production, assembly and maintenance. Bridge cranes can also be used to load and unload trucks, making them an essential part of any supply chain.

Overhead Bridge Crane for Metal Refining

Metal shop overhead bridge cranes are commonly used in the refinement of steel and other metals, such as copper and aluminum. At every step of the manufacturing process, until they leave a factory as finished products, raw materials and metal workpieces are handled by an overhead charge crane. Molten irons are poured into a furnace by crane, hot metal is then rolled to specific thickness and tempered or annealed, and then stored by a giant overhead crane for cooling, the finished coils are lifted and loaded onto trucks and trains by the steel mill overhead crane, and the fabricator or stamper uses an overhead crane to handle the steel in his factory.

Overhead Bridge Crane for Automotive Manufacturing

The automobile industry uses 10 ton overhead bridge cranes on assembly lines. Overhead cranes are critical in handling bulky molds, components, and raw materials. They move automotive materials along different stations until the end product is completely built, making assembly lines much more efficient.

Overhead Bridge Crane for Paper Milling

Bridge cranes are used in paper mills for equipment installation, routine maintenance, and the initial construction of paper machines. Almost all paper mill bridge cranes are used for regular maintenance and removal of heavy press rolls and other equipment. The bridge cranes are used in the initial construction of paper machines because they make it easier to install the heavy cast iron paper drying drums and other massive equipment, some weighing as much as 70 tons.

Double Trolley Overhead Crane

The double trolley overhead crane is a type of crane equipped with two trolleys, which can lift loads simultaneously or separately. The dual trolleys overhead crane is used widely used to lift long loads or loads with two long distance lifting points. With the lifting capacity of 5 to 400 tons, the double trolley overhead bridge crane is used widely to handle heavy loads, in places such as storage, workshop, stock yard, or other factories and mines, etc. The popular models are 200 ton overhead bridge crane, 250 ton bridge crane and 400 ton bridge crane. 

Insulation Overhead Bridge Crane

Insulation overhead crane is also called isolation overhead crane which is a special designed overhead crane with insulation, used in charged environment, such as, electricity power plants, and factories, where has electrolyse non-ferrous metals, such as, aluminum and magnesium, etc.

Explosion Proof Overhead Crane

Explosion proof bridge crane, or flame proof bridge crane, is a specialized type of overhead crane designed for use in hazardous environments where there is a risk of explosions due to the presence of flammable gases or dusts. For example, Petrochemical Plants, Petrochemical Plants, Chemical Processing Facilities, Paint and Coating Factories, Energy and Power Generation Plants, Mining Industry. These sites is always with explosive air mixture formed with inflammable gas (or steam) and air. The explosion proof overhead bridge crane is installed with anti-explosion electric hoist, anti-explosion motors and electrical devices. The explosion-proof overhead crane is designed for hazardous areas zone 1 and zone 2 of European standard ATEX 2014/34/UE. Proofing ability is not higher than grade II B or II C-class.

Metallurgic Overhead Crane

Metallurgic overhead bridge crane is a type of overhead crane used in the metallurgical plants, with many different sub-types according to the functions of the overhead cranes. Max lifting capacity is 360 ton. Ladle overhead crane is used specially for transporting and handling hot metal in the process of smelting liquid metal, etc. Foundry overhead bridge crane is one of the key equipment in the steelmaking process, applicable to metal smelting workshops to lift and move hot molten metal. Foundry overhead cranes work in harsh environments with high temperature, high dust and harmful gases, and are generally suitable for ambient temperatures of -10 °C to + 50 °C.

Stacker Bridge Crane

Overhead stacker bridge crane is an essential lifting solution for shelving and storage management. This customizable tool is invaluable for loading and unloading products from shelf-style storage and offer reliably smooth, safe, and efficient performance. Warehouses, tool rooms, and limited-space storage facilities rely on stacker overhead bridge cranes to meet various needs.

Scrap Handling Crane

The steel scrap handling overhead bridge cranes are used for loading metal scrap into buckets which are then transported to the melt shop. These heavy duty overhead cranes are designed to withstand heavy loads and harsh environments in scrap yards.

Electromagnetic Overhead Bridge Crane

The magnetic overhead bridge crane, or electromagnetic overhead crane, is a type of crane that uses electromagnets to lift and move ferrous materials such as steel pipe, bar, iron, and scrap metal. The electromagnetic bridge cranes are essential in industries that deal with heavy, magnetic materials, including steel mills, foundries, and scrap yards. Whether you’re handling heavy steel beams or recycling scrap metal, you’ll find a suitable electromagnetic crane at YUANDA tailored to meet your lifting needs.

Grab Overhead Crane

Designed for bulk material handling, the hydraulic grab bucket overhead bridge cranes come with specialized grab, grapple or bucket for lifting and moving powder, granular bulk materials and loose materials such as sand, gravel, fertilizer, coal, grain, steel scrap and garbage. They are widely used in storage warehouses, power station, smelting workshop of steel mill, sea port, waste recycling station, scrap yards, cement plants, lumber mills, fertilizer plants, and container handling, where continuous and efficient bulk material handling is required. This crane includes 2 types: power generation overhead crane and coal handling overhead bridge crane. 

Automated Overhead Bridge Crane

An automated handling system can control a complete intralogistics system within a single computer program and 5G wireless network. Manned by an operator in a control room rather than a crane cab, a fully automated overhead bridge crane system can help minimize the risk of injury to workers while still maintaining the same level of efficiency and precision. We automated overhead bridge cranes are used for the transport, warehousing, management, storage and retrieval of heavy loads, creating complete automation solutions that include both electromechanical and software interventions. All industries can benefit from an overhead bridge crane automation system to streamline their general manufacturing, including plating, aluminum, aluminum extrusion, steel production, steel warehousing, and more. Thanks to our deep knowledge of the industry, we apply all our experience in the field of automatic bridge cranes both at WMS and WCS level up to the PLC and to the electrical and on-board machine engineering. We also offer 24/7 electromechanical, software and IT assistance and maintenance services.

In the processing workshops of different industries, there are many different machining equipment, including CNC machines, laser cutting machines, sawing machines, glass cutting line machines, glass double edging machines, granite line polishing machines and so on. Bridge cranes provide a reliable lifting solution and speed up the operation efficiency of these machines. The general uses of overhead cranes are as varied as the industries they serve. For warehousing application, they move large, heavy products to and from docks and loading areas. For transportation industry, they assist with unloading ships, and load railcars and trailers with finished cargo. For storage, they transport and organize bulky loads, example of an overhead crane being used to lift heavy rolls. Metal fabricators rely on hoists and bridge cranes to handle the demanding service cycle of large coils, billets, and sheets of material. Automotive manufacturers utilize hooks to maneuver large molds and components through the assembly production process from start to finish. Industrial operators depend on girder cranes for precise placement of large equipment or bulky loads. No matter the size or weight, loading and unloading overhead bridge cranes offer safe, efficient load management.

Technical Parameter of Overhead Bridge Crane for Sale

*Overhead bridge crane specifications may be subject to change without notice

How to Select the Right Type Of Bridge Crane for Your Application?

Many factors need to be considered when deciding which type of over head crane will be best for your application: What is the weight being lifted? What span will the overhead crane need to be? How often will it be in use? When choosing a crane for your application, it’s important to understand the different types of bridge cranes available and the features and benefits they provide. Once you have that information, you’ll be able to make the best decision to meet your needs, taking into consideration crane class, space requirements, and your budget. Our in-house engineering can provide a complete package of footing design, runway design and bridge crane design. Our sales engineers can provide the expertise to help you choose the correct piece of equipment for your application.

• Types of overhead bridge crane: _______? Options: Single girder or double girder overhead crane, light duty bridge crane, etc.
• Loading capacity of overhead bridge crane: _______tons? Options: 0.25ton, 0.5 ton, 1 ton, 2 ton, 3ton, 15ton, 16ton, 20ton, 25 ton, 30ton, 35ton, up to 550ton gantry crane.
• Crane span & lifting height: _______meters? The span or width of the overhead bridge crane system is important to decide the size of the bridge crane.
• Crane travelling length/Runway length: _____meters?
• Control method of bridge crane: _______? Options: pendant control, remote control, cabin control
• Power source: How is the crane powered? All motorized or hand push-pull? If motorized overhead bridge crane, how fast? Single or dual speeds? Variable frequency drives?
• Voltage supply of overhead bridge crane: _____? Electrical requirements of the bridge crane, e.g.: 380V 50/60HZ,3Phase or others, etc.
• Application/usage of crane: ______? E.g.: The overhead bridge crane will be used for steel mill, CNC mill, injection mold, cement, stone, concrete, granite, general manufacturing, etc. and will this be indoors or outdoors? What is the size of the building structure?
• Which country are you located in? E.g.: The bridge crane will be employed in Thailand, Poland, Saudi Arabia, Russia, Belarus, Singapore?
• Working frequency: The operational frequency can define the bridge crane classification needed for your application. Overhead Crane Classes? Class A, Class B, Class C, Class D, Class E, and Class F. Having a better understanding of overhead crane classes can help ensure you select the right crane for your application and save you from paying for components you do not need.
• Supporting systems: Usually, the bridge crane is supported by runway structures, attached to workshop building; Or the bridge crane could be supported on a free standing structure(columns and runways) set up specifically for the crane.

What is the bridge crane price? How much does a bridge crane cost? These are the issues that customers are most concerned about. By understanding the factors affecting overhead bridge crane price, you can make an informed decision and choose the right bridge crane to meet your project requirements. Our team is ready to help you decide which crane is right for you.

Overhead Bridge Crane Installation and Commissioning

At YUANDA, we specialize in custom overhead bridge cranes and material-handling applications. Our experienced team will work with you to design and fabricate a bridge crane that meets your specific needs and requirements. We offer a wide range of services, including crane fabrication, automation, parts, bridge crane installation, inspections and training, repair and maintenance, upgrades, and commissioning. 

Overhead cranes require routine maintenance to ensure a long life of safe, reliable lifting. The YUANDA Crane team suggest operators to run a series of checks every day to help maintain top performance for their systems. Be sure to follow the OEM recommended inspection schedule; with proper maintenance, an overhead crane can last for over 50 years. Our company has a team of trained and certified service technicians to conduct both bridge cranes and hoist inspections. We have many distributors and branches in China, including Henan, Xinxiang, Guangzhou, Qingdao, Anhui, Shandong, Weifang, Fujian, Wuxi, Beijing, etc., which can provide customers with timely after-sales service.

Our complete turnkey project services for warehouse overhead bridge cranes are designed to get you up and running quickly! From bridge crane erection and rail installation/replacement to certified load testing and inspection, used bridge crane disassembly and disposal, our service technicians are trained to ensure quality results in the shortest time. Additionally, the group offers a variety of resources—including installation guidelines, engineering specifications, safety tip and fact sheets, inspection and maintenance checklists, electrical circuit diagram, user manuals, safety seminars and more documentations. What's more, professional overhead bridge crane operator training in terms of bridge crane working principle and overhead bridge crane maintenance is also provided.

Overhead Bridge Crane Manufacturer in China

Being a reliable bridge crane manufacturer in China, we specialize in delivering high quality crane solutions tailored to meet the diverse needs of our clients across various industries. Our extensive range of lifting equipment includes overhead cranes, gantry cranes, and jib cranes, each designed to enhance operational efficiency and safety in material handling processes. Regardless of your needs, we design, build, and install custom crane systems to fit your specific application. We ship and export to many countries including the United States, Canada, Germany, Indonesia, Malaysia, Bahrain, Mexico, Chile, Peru, Finland, UAE, Middle East, Saudi Arabia, Turkey, Pakistan, Iran, Bangladesh, Japan, Kenya, Kuwait, Australia, European, the United Kingdom, EU, and more. All our gantry cranes are CE certified.

Overhead bridge crane design drawings and operation manual can also be provided by our technical team. Contact us online now to get an overhead bridge crane price quote.